Taken out of service because of business restructuring, properly drained and
stored for 6 months. Recently tested, got new capping station since sponges
were dried out, Pump quit during testing and wash, but it runs beautifully.
Will need a certified technician to come and service it and replace maintenance
parts. (ex: 2 print heads and a pump) Estimated cost for service and replacement
parts is somewhere around $1500.00. Great buy for a savvy shopper!
This
machine has very little time on it and runs beautifully. The printer has
been upgraded and uses ECO-SOL inks (yellow, light magenta, light cyan, magenta,
cyan, and black). This also comes with the infrared drier unit for faster
drying. Software, power cord, manuals are also included. - Handles media
up to 1371 mm (54 inches) wide - Superior fidelity astounding color
reproduction - High-performance, high precision contour cutting -
ColorChoice RIP included - Overprint feature for printing fabrics -
Automatic sheet cutter - Great for logo's and indoor and outdoor printing
- Without any need for special ventilation or environmental equipment, the
SOLJET enables sign makers to print signs and banners without compromises in
color or quality at up to 1440 dpi. The graphics are ready to be displayed as
soon as the SOLJET finishes printing them. Only the most severe applications,
such as floor and vehicle graphics, require lamination. ECO-SOL inks will
print on almost any inkjet vinyl and inkjet material. Roland ColorChoice
Software RIP Included: - For printing and cutting all kinds of graphics,
Roland ColorChoice is the ideal RIP software for today's sign maker. The
software is loaded with print profiles and advanced cutting features especially
prepared for the SC-500. It is a true Adobe PostScript 3 multi-platform RIP that
provides total control over the printing process. With Roland certified media
and inks, ColorChoice ensures beautiful, consistent results. Includes
automatic take-up real - a $2400 option and infrared drier - $1500 cost. May
also include one (1) roll of Roland brand white vinyl and perforated window
vinyl. Buyer pays freight outside of local area, Seller prefers Cashiers
Check. All payment and other arrangements will be determined after auction end.
Please ask any questions before bidding. Roland Specs:
Model SC-500 Printing/Cutting method Piezo ink-jet method/media-moving
method Printing/Cutting area
1346.2 mm x 24998 mm (53 in. x 984-1/8
in.)
Acceptable material width
130 to 1371 mm (5-3/16 to 54 in.) (Note that
detection of the front and rear edges is not possible for material measuring
from131 mm to 430 mm (5-3/16 to 17 in.).)
Conditions for usable
materials
Cuttable material thickness: 0.08 to 0.22 mm (0.00315 to 0.00866 in.)
(depending on material composition)
Maximum cuttable material thickness
including base paper: 0.4 mm (0.0157 in.)
Maximum printable material thickness
including base paper: 1.0 mm (0.039 in.) (when head is raised to
maximum)
Maximum diameter for roll material: 180 mm (7-1/16 in.)
Core inner
diameter for roll material: 50.8 mm (2 in.) or 76.2 mm (3 in.)
Maximum weight
for roll material: 20 kg (44.1 lb.)
Ink cartridges
Type
UPGRADED ECO-SOL INK
cartridge
Capacity
220 cc ?}5 cc
Color
Six colors: cyan, magenta, yellow,
black, light cyan and light magenta
Printing resolution (Printing dot
resolution)
1440 dpi x 720 dpi / 720 dpi x 720 dpi / 540 dpi x 540 dpi / 360
dpi x 720 dpi / 180 dpi x 720 dpi
Acceptable tool
Cutter (blade and blade
holder): Special blade for CAMM-1 series
Cutting speed / force / offset
10 to
600 mm/s (10 to 300 mm/s in the material-feed direction) / 30 to 200 gf / 0.000
to 1.500 mm (0 to 0.0591 in.)
Software resolution (When cutting)
0.025 mm/step
(0.00984 in./step)
Distance accuracy (When cutting)
Error of less than ?}0.4%
of distance traveled, or 0.3 mm, whichever is greater
When distance correction
has been performed (when the setting for [CALIBRATION] - [CUTTING ADJ.] has been
made):
Error of less than ?}0.2% of distance traveled, or 0.1 mm, whichever is
greater
Repetition accuracy (When cutting)
0.1 mm or less (excluding
stretching/contraction of the material)
Range for assured repetition
accuracy
For materials with a width exceeding 610 mm (24 in.): Length 4,000 mm
(157-7/16 in.)
For materials with a width of 610 mm (24 in.) or less: Length
8,000 mm (315-15/16 in.)
Repetition between printing and cutting
?}0.5mm
(0.0197in.) max. at 25??C (0??F) (Excluding possible shift caused by
expansion/contraction of the material and/or by reloading the material, and
provided that material length is under 3000 mm (118-1/16
in.)
Interface
Bidirectional parallel interface (compliant with IEEE 1284:
nibble mode)
Power consumption
Printing/Cutting mode
Maximum: 1.0A/100V to
240V ?}10% 50/60 Hz
Standby mode
Maximum: 0.4A/100V to 240V ?}10% 50/60
Hz
Acoustic noise level
Printing/Cutting mode
64dB (A) or less (According to
ISO7779)
Standby mode
40dB (A) or less (According to
ISO7779)
Dimensions
With stand
2325 mm [W] x 736 mm [D] x 1287 mm [H]
(91-9/16 in. [W] x 29 in. [D] x 50-11/16 in. [H])
Weight
With stand
105 kg
(231.5 lb.)
Environment
Power on
Temperature: 15 to 35 ??C (59 to 95 ??F),
Humidity: 35 to 80 % (non-condensing)
Power off
Temperature: 5 to 40 ??C (41
to 104 ??F), Humidity: 20 to 80 % (non-condensing)
Accessories
Power cord:
1, Drain bottle: 2, Drain-bottle cap: 1, Screws: 2, Blade: 1, Blade Holder: 1,
Roland COLORCHOICE? : 1, User manual: 1 Maintenance CD
